To reduce the risk of bodily injury, electric shock, fire, and damage to your instrument, please read and observe the precautions in User’s Guide of each individual instrument.
If the product is used in a manner not in accordance with the equipment design, operating instructions or manufacturer’s recommendations, the operation of the product may be impaired to the extent that a safety hazard is created.
Do not attempt to perform electrical work if you are not fully qualified. A User’s Guide is not a substitute for electrical training.
Advanced Instruments, Inc. products should be operated only with the type of power source indicated on the product’s electrical ratings label. Refer to the installation instructions included with the product.
If the power cord provided is replaced for any reason or if an alternate cord is used, the cord must be approved for use in the local country. The power cord must be approved for the product’s listed operating voltage and be rated at least 20% greater than the ampere ratings marked on the product’s electrical ratings label. The cord end that connects to the product must have an IEC 60320 connector.
